Derma Pen Cartridge Needle Tip
ホーム> 製品 >Derma Pen Cartridge Needle Tip

Dermapen Microneedle 32G Micro Needle Cartridge Tip for Dermapen 3 MD

アイテムナンバー: TB12D
Needle cartridge uses 12 micro-sized 33-gauge needles to stimulate the dermis faster than manual MTS. Electronically powered needles vertically pierce the skin to enhance rejuvenation results, maintain epidermal integrity and reduce damage.
説明 技術パラメーター 技術の原理 会社情報


Product Details


Dermapen Cartridges Micro Needling Tip


Medical CE / ISO13485 / RoHS / FDA / PSE



Needle Depth

0 - 2.5mm

Needle Number


Needle Material

Medical 316 Stainless Steel



Used For

Dr.pen-A7, Dermapen3 MD

Payment & Shipping

Minimum Order Quantity


Packaging Details

Carton box, 10pcs/20pcs

Delivery Time

After confirm payment wihin 1-2 days

Payment Terms

Paypal, Western Union, T/T

Supply Ability



Dermapen 3 Microderm Cartridge

The Dermapen 3  uses 12 micro-sized 33-gauge needles to stimulate the dermis faster than manual MTS. Electronically powered needles vertically pierce the skin to enhance rejuvenation results, maintain epidermal integrity and reduce damage. The spring-loaded Dermapen needle tip uses an automated, stamp-like action, that enhances the absorption of topical solutions used during treatment and afterwards.

Dermapen 3 Needle - Dermapenworld

The penetration depth of the needles can be adjusted directly on the device, so there is no need to change the tip in order to treat areas that require deeper or more superficial treatments. The area of the tip which comes in direct contact with the skin is about 1 centimeter in diameter, which makes it easy to treat hard to reach areas inaccessible to dermal rollers.

All Dermapen needle cartridges are:

  • single packed

  • single use

  • sterile (using Gamma ray radiation)

  • spring loaded

  • surgical grade stainless steel needles (33 gauge)

  • suitable for Dermapen 3MD and PRO models



Q: How are the needle tips sterilized? 

A:To ensure safety we use only the most advanced sterilization procedures and packaging materials. Currently, we are using gamma ray radiation to sterilize the needle cartridges. This method gives 3 to 5 years of guaranteed sterility from date of manufacture.

Q: How many times can each needle tip be re-used? 

A:Dermapen’s sterile needle tips are designed to be disposable and are for single-use only, to prevent cross-contamination and infection. The needle tips cannot be properly sterilized after use due to the materials used in their construction. We strongly recommend against re-using needle tip cartridges, as patient safety is of paramount importance. Dermapen’s design permits the user to change the needle tip cartridge after each treatment. A low consumable cost of the needle tips, combined with little to no downtime for the patient, makes Dermapen an ideal solution.

Q: Does the tip need to be changed if several areas on a patient’s body are being treated within the same session? 

A:There are no safety concerns in the situation described above when the sterility protocol is followed properly, however, there are some other factors that need to be considered. One of them is the severity of the condition being treated. While the needles do retain their sharpness for the entirety of a generic Dermapen Treatment and beyond, a practitioner may want to use a new tip if particularly thick scar tissue spanning over a large area is being treated. In most cases, this is not necessary.

Another issue is the use of TLA when treating several large areas. As a general rule, TLA should not be applied to a composite area of an A4 sheet of paper during any single treatment. If a larger area, such as the back, needs to be treated and TLA application is necessary, it is recommended to break the area up and treat it over several sessions.

If you have any other questions or think something is missing from this section, please contact us!



SEA HEARTは美容製品の専門メーカーである。 2003年以来、私たちはスペイン、韓国、ドイツおよびその他のトップメディカルグループに製品を製造している。2003年以来、我社は独立の輸出入の権利を持っている。その結果、世界でさまざまな製品を配布することができる。私たちの製品は、欧州のCE、RoHS、PSE、FDA、ISO9001:2001、ISO13485:2003などの認証を受けていた。



1. 工場か商社ですか?

2. 施設は品質管理はどのように扱いるか?

3. OEMおよびODMサービスを提供しているか?

4. 工場はどこですか?

5. 何か保証がありますか?

6. アフターサービスはどのようにしているか?

7. 認証はありるか?

8. 機械の使い方を教えていますか?
はい、私たちは、完全なユーザーマニュアルを提供し、ガイダンスとアプリケーションにビデオを使用することができる。 24時間体制の全天候型オンラインコンサルタンシーサービスにあり、問題が発生するときにいつでも簡単に解決できる。誰も使いです。

9. 出荷はいかがですか?